Category: PRODUK KAMI

Read more

Schneider TCSESU053FN0 ConneXium Ethernet Switch

This product is part of the ConneXium range, an offer of Ethernet connecting devices. This TCP/IP unmanaged switch has five 10BASE-T/100BASE-TX ports for copper cable. It is a network switch with a supply voltage of 24V and a power consumption of 2.2W. This product offers you a smart and flexible way to integrate Ethernet solutions into your operation. It is furnished with 3-way removable connector (power supply) for electrical connection. The supported transmission medium is twisted shielded pair category 5E copper cable. Ethernet services are auto MDI/MDX, automatic negotiation of 10/100Mbps and duplex mode, storage and re-routing of received data and automatic change of polarity. It is an IP30 rated product. Its dimensions are 25mm (width) x 79mm (depth) x 114mm (height) and weighs 0.113kg. This product is certified by CE. It meets CSA C22.2 No 142 and CUL 508 standarts

Read more

Eaton MTL4511 Switch Proximity Detector Interface

The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area. When selected, open or short circuit conditions in the field wiring are detected by the linefault-detect (LFD) facility and also indicated on the top of the module. Phase reversal for the channel is selected by a switch on the side of the module and output is provided by changeover relay contacts.

Read more

Eaton Crouse Hinds MTL5511 Switch Proximity Detector Interface

The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area. When selected, open or short circuit conditions in the field wiring are detected by the linefault-detect (LFD) facility and also indicated on the top of the module. Phase reversal for the channel is selected by a switch on the side of the module and output is provided by changeover relay contacts  

Read more

Eaton MTL5541 Repeater Power Supply, 4/20mA, For 2 or 3 wire Transmitter

The Series MTL5541 Galvanic Barrier provides intrinsically safe isolation for communication with Dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. DIN rail mounting and plug-in signal and power connectors simplify installation and maintenance.

Read more

Eaton MTL5510 4-Chanel Switch / Proximity Detector Interface

✨ Spesifikasi: – Jumlah saluran: 4, terkonfigurasi dengan sakelar. – Lokasi sakelar: Zon 0, IIC, T6 area berbahaya. – Lokasi detektor dekat: Zon 0, IIC, T4-6 jika sertifikasi sesuai. – Input/Output karakteristik: Normal fase. – Tegangan sensor: 7 hingga 9V dc dari 1kΩ ±10%. Karakteristik Input/Output Output tertutup jika input > 2.1mA (< 2kΩ). Output terbuka jika input < 1.2mA (> 10kΩ). Hysteresis: 200µA (650Ω). Deteksi kesalahan jaringan (LFD): Pengguna dapat memilih melalui sakelar. Output Area Aman Output padat logam terpisah kompatibel dengan rangkaian logika. Frekuensi operasional: dc hingga 500Hz. Tegangan off-state maksimal: ± 35V. Arus Leakage maksimal: ± 50µA. Indikator LED Hijau: Indikator daya. Kuning: Aktif saat output aktif. Merah: Indikator LFD + LED kuning yang memantul untuk saluran yang salah. Konsumsi Arus dan Pembebanan Konsumsi arus maksimal: 40mA pada 24V. Pembebanan unit: 0.96W pada 24V, dengan beban 10mA. Deskripsi Keamanan Uo=10.5V, Io=14mA, Po=37mW, Um=253V rms atau dc.

Account details will be confirmed via email.